Automation Products
Cleaveland/Price to Exhibit at the IEEE conference in Denver
April 16-19, 2018
Denver, CO, USA
Visit us at Booth #668 and get hands-on with our high voltage disconnect switches, multi-way switches, motor operators, sensors, and RTUs.
Join Us at DistribuTECH 2018!
DistribuTECH remains the premier event for learning about the cutting-edge advancements in utility products. Where else do over 500 vendors assemble on a yearly basis to explain how their products can help you improve your system? And with registrants from over 300 utilities attending, networking opportunities abound. There are 14 session tracks that address all of the hot topics in our industry, including distribution automation, microgrids, energy storage, and substation automation. If you want to keep up with advances in the electric industry, San Antonio is where you want to be Jan. 23-25.
While at the Henry B. Gonzalez Convention Center, visit Cleaveland/Price on the expo floor at booth #2935. We’d love to share the latest developments in our LineScope®, Reliatronics RTU products, and submersible current monitors with you!
RTU3212
RTU3212
The RTU3212 is a compact board-to-board RTU that functions as the head-end data processor of the Cleaveland/Price LineScope system. It also mates with the control board of Cleaveland/Price ADMO, PTAD, UAD, and PAD automation motor operators. Through its 4 DO’s and 15 DI’s, the 3212 adds control functions and status reporting to our motor operators. The RTU utilizes DNP3.0 protocol with the option to select Modbus or PG&E protocol as an alternate protocol. The board-to-board configuration eliminates wiring and results in a time saving and space efficient installation.
Typical Installation
Shown is an RTU3212 installed on the control board of a motor operator.
Brochures
Documentation
View RTU3212 Data Sheet
Login to your CP customer portal account to access support documentation for Reliatronics RTUs.
Cleaveland/Price to Exhibit at the Grid Edge World Forum
San Jose, CA USA
June 21-26, 2016
Visit us at Booth 313
and let’s talk about how Cleaveland/Price can improve reliability of your Smart Grid switch automation and power monitoring
Cleaveland/Price to Exhibit at the IEEE conference in Dallas
IEEE PES T&D Conference and Exposition
Dallas, TX USA
May 2-5, 2016
Visit us at Booth 120
and check out the Cleaveland/Price LineScope™ overhead line power monitor
DistribuTech Conference and Exhibition
2016 DistribuTech Conference and Exhibition
 |
|
Orange County Convention Center Visit us at Booth #2154 |
TP-D2 Distribution Substation Class Motor Operator for Torsional Pipe
For distribution substation switch applications that take a torsional motion, Cleaveland/Price offers the TP-D2 torsional operator. These operators are used for operating loadbreak distribution switches that require a fast operation to extend the life of the interrupter. Operation time of the TP-D2 is 0.4 second with a torque output of 8000 in-lbs. The TP-D2 has available voltage inputs of 125 VDC, 120 VAC, and 240 VAC.
TP-D2 Torsional Operator Features
- Powder coated NEMA 3R aluminum enclosure (NEMA 4 available)
- Dynamic braking for electrical stop
- Local/Remote control
- Internally stored swing handle for manual operation
- Non-cast, adjustable mechanical stops
- Torque relief decoupler
- 4/0 ground strap
Brochure
Outline Drawing
RP-C2 Distribution Substation Class Motor Operator for Reciprocating Pipe
For distribution substation switch applications that require a reciprocating motion, Cleaveland/Price offers the RP-C2 reciprocating operator. These operators are used for operating loadbreak distribution switches that require a fast operation to extend the life of the interrupter. Operation time of the RP-C2 (shown to right) is 0.4 second with a force output of 800 lbs. The RP-C2 has available voltage inputs of 24 VDC, 48 VDC, 125 VDC, 250 VDC, 120 VAC, and 240 VAC.
RP-C2 Reciprocating Operator Features
- Powder coated NEMA 3R aluminum enclosure (NEMA 4 available)
- Dynamic braking for electrical stop
- Local/Remote control
- Internally stored side handle for manual operation
- Switch specific stroke distance is factory set
- Coupler for fiberglass rod or steel pipe
- 4/0 ground strap
Brochure
Outline Drawing
TP-C2 and TP-C3 Substation Class Motor Operators
Cleaveland/Price offers several types of substation class motor operators to meet customer applications. TP-C2 and TP-C3 motor operators are designed to operate substation class disconnect and loadbreak switches that require a torsional motion. Operation time of the TP-C2 is typically 5-6 seconds (180 degree rotation) with available torque output ratings of 10,000 in-lbs. and 20,000 in-lbs. The TP-C3 motor operator features a permanent magnet motor and is available with torque output ratings of 20,000 and 30,000 in-lbs. at an operating time of 5 seconds /20,000 in-lbs. and 11 seconds /30,000 in-lbs.
TP-C2 and TP-C3 features
-
- Powder coated NEMA 3R aluminum enclosure (NEMA 4 available)
- Dynamic braking for electrical stop
- Local/Remote control
- “Fast stop” button
- Handcrank for manual operation
- Non-cast, adjustable mechanical stops
- Torque relief decoupler
- 4/0 ground strap