Cleaveland/Price to exhibit at ICUEE
Kentucky Exposition Center
Louisville, KY 40209
September 29 – October 1, 2015
Visit us at Booth #1407
Enclosed Switches
Isophase Bus Disconnect Switch
The LCG-C switch is available as an isolated phase bus disconnect switch that is available to 34.5 kV, 10,000 A. continuous with a maximum momentary rating of 325 kA peak momentary, 108 kA short time (3 seconds).
The switch is provided with an enclosure that will match an existing isophase bus run enclosure or can be supplied without an enclosure as an OEM product. The switch typifies the Cleaveland/Price philosophy of designing for simplicity and reliability.
Isophase Bus Disconnect
Switch Operation
The switch may be operated manually with a wall or stanchion mounted worm gear operator or electrically with a type TP-C2 motor operator.
Single Throw Disconnect Switch
The LCG-C is a three phase, group operated switch used for isolating applications within segregated and non-segregated bus systems. LCG-C switches are non-load make or break, and do not have fault closing capability. The switch is available at voltage ratings from 5 kV to 34.5 kV and current ratings to 8000 A. The switch typifies the Cleaveland/Price philosophy of designing for simplicity and reliability. The switch has a unitized design with the three phases factory assembled on a common base for ease of installation.
LCG-C switches
 |
LCG-C switches feature a total non-cast design for superior dependability of parts. All current carrying parts are fabricated from hard-drawn, high-conductivity copper. The silver-to-silver contacts are backed by stainless steel conical springs. The switches are typically supplied with wet process porcelain insulators. |
LCG-C Operators
 |
The switch may be manually operated with a chain drive operator, a side handle, a wormgear operator, or a pump handle. Selection of the operator is dependent upon switch rating, switch mounting height, and clearances around the switch. All operating handles are padlockable. Provision for mounting key interlocks is available. The switch is also available with a motor operator with available motor and control voltages of 120 VDC, 120 VAC, and 250 VAC. |
Outline Drawings
5 kV – 15 kV, 600 A. – 2000A. – chain drive operator
7.2 kV – 23 kV, 3000 A. – wormgear operator
34.5 kV, 1200 A. – chain drive operator
34.5 kV, 2000 A. – chain drive operator
34.5 kV, 2000 A. – motor operator
Double Throw Transfer/Grounding Switch
The LCG-CD is a three phase, double throw, non-load break, no fault closing switch for use indoors or mounted in an enclosure for outdoor applications. The switch can be designed for grounding or transfer function. As a transfer switch, the switch may be used to select one of two loads or sources. As a grounding switch, the line or load side of the switch is automatically grounded in one position.
LCG-CD
 |
The switch may be manually operated with a chain drive operator, a side handle, wormgear operator, or a pump handle. Selection of the operator is dependent upon the switch rating, switch mounting height and clearances around the switch. All operating handles are padlockable. Provision for mounting key interlocks is available. |
Outline Drawing
Home
Switch Products
Cleaveland/Price offers a wide array of switch products. Choose the switch product(s) that best suits your company needs.
Automation Products
Cleaveland/Price also offers a variety of switch automation products as well. Choose the automation product(s) that best suits your company needs.
Line Sensors / Data
Cleaveland/Price offers Line Sensors and Data Collectors for various needs. Check out our new LineScope™ Power Quality Monitor.
News and Events
View recent Cleaveland/Price news and events. Get up to date details on upcoming trade shows and new products.
Reliatronics RTUs
Reliatronics agreed to join Cleaveland/Price to strengthen the Reliatronics brand. Cleaveland/Price will continue to supply Reliatronics RTUs.
Indoor Group
Indoor Group Switches
 |
Cleaveland/Price indoor / enclosed switches are typically three phase, group operated switches used for isolating applications within segregated and non-segregated bus systems and isophase systems. The disconnect switches are non-load make or break, and do not have fault closing capability. Switches can be supplied in a padmount enclosure or elevated bus run enclosure or can be supplied without an enclosure. Available switch voltage ratings range from 5 kV to 34.5 kV and current ratings to 8000 A. with a maximum peak momentary rating of 325 kA. Switches may be manually or motor operated. |