Aluminum Vertical Break
The Original—Built on a Proven Legacy
Efficient, simple designs that utilize industry proven principles and materials for superior performance and long-term reliability.
Aluminum Vertical Break Switch
V2-CA
The Cleaveland/Price V2-CA is a three pole, group operated aluminum vertical break switch for installation in substation or transmission line locations
Aluminum Vertical Break Switch
V2-CAU
Similar to the proven V2-CA design, the V2-CAU utilizes three-sided terminals to allow greater flexibility when making connections with multiple conductors
Aluminum Vertical Break Switch
V2-CAV
Same as the proven V2-CA design, the V2-CAV offers an inclined insulator at the jaw end to reduce the base footprint for more compact base mounting requirements
Aluminum Vertical Break Features
Designed for Simplicity and Superior Reliability
- Unbreakable, non-cast copper terminal pads with NEMA standard hole pattern
- Fully insulated journal bearing
- Unbreakable, non-cast operating crank
- Stainless steel counterbalance springs insulated from the current path
- Hard-drawn, high conductivity copper current-carrying parts
- Silver-to-silver contacts at hinge and jaw
- Stainless steel contact springs insulated from the current path
- Hard-drawn, high conductivity copper contact fingers at hinge and jaw
- Plain or tin-plated terminal pads
- Hot-dip galvanized steel base
- Double-sealed, maintenance-free bearing assembly
Engineered for Performance
Cleaveland/Price has a very basic approach to design: keep it simple. It is an approach employed from material selection to mechanical design. The Cleaveland/Price V2-C disconnect switch current carrying parts are manufactured from high strength, high conductivity copper. All switches are of non-cast design for superior dependability of parts. Switch performance is not troubled by flaws that could occur in the casting process. Contacts are designed to take advantage of electromagnetic forces by using a reverse loop configuration at both the hinge and jaw of the switch. Current transfer points are kept to a minimum.
Blade Turnover
Innovation for Full Contact Pressure
Traditional Problem
When the blade on a conventional switch rotates to the final closed position in the break-jaw, it does not consistently stop at the point of optimum contact pressure.
Many switches use a stop on the rotating insulator to set the blade position in the break-jaw. Due to the cumulative play of the multiple linkage points, this type of stop is too distant from the blade to accurately control the blade motion, . Additionally, inconsistent operating speeds can negatively affect proper blade turnover and position in the break-jaw. These fundamental design weaknesses lead to inadequate contact pressure that eventually causes contact pitting, burning, and failure.
Innovative Solution
Instead of locating the blade stop on the rotating insulator, the Cleaveland/Price 500 kV V2-CA blade stop is factory-machined directly into the blade at the hinge. This superior location of the blade stop removes all cumulative linkage play and ensures accurate blade rotation in the break-jaw, consistently completing the closed operation at the precise point of achieving maximum contact pressure—no matter how slow or fast the switch is operated.
The cutaway view shows how the unique Cleaveland/Price turnover stop allows the blade to rotate until the factory-machined slot in the blade engages with the hinge pin. This results in a consistent and highly accurate blade turnover angle with full contact pressure for every operation.
Patented Break-Jaw Design
The Conventional Break-Jaw Problem
Conventional break-jaw designs lose contact pressure during short circuits due to inferior placement of the contact springs.
The forces generated under short circuits create a side-to-side movement of the blade within the break-jaw. Causing a make-and-break action between the blade and jaw contacts. Resulting in arcing, pitting, and burning of the switch contacts.
The Innovative Solution by Cleaveland/Price
The superior Cleaveland/Price 500 kV V2-CA break-jaw design maintains a constant high-contact pressure as the blade moves side-to-side and increases during short circuits by working in unison with the electromagnetic forces generated by the current path.
The ideal location and design of the contact springs join the contact fingers together, allowing the switch contacts to move side-to-side with the blade during short circuits. This floating contact spring system maintains contact spring pressure during side-to-side movement while maintaining a constant electrical connection to ensure no arcing of contacts.
StayDry® Bearing
The StayDry® bearing provides the ultimate in reliability as a patented, watertight ball bearing assembly for rotating insulators on disconnect switches.
The application of hydrophobic membrane technology eliminates seal stress and maintains an environment free of both water and condensing moisture, thereby preventing any corrosion. This proven technology has been used across a wide array of industries for decades to protect enclosed volumes from the effects of temperature and pressure fluctuations, moisture, and contaminants.
Vertical Break
Superior Reliability and Dependability.
Quality materials are the foundation of any reliable disconnect switch. Made from high-quality materials, Cleaveland/Price vertical switches feature an all non-cast design, reducing potential casting defects and enhancing long-term dependability.




