Unitized “Quick Install” Switches
For 69kV-230kV Transmission Applications
Our quick install transmission switches utilize the same proven design features as on our substation class disconnect switches. The switch ships from the factory fully adjusted and ready to be installed.
Unitized Transmission Switch Features
- “Quick Install” switch that ships from the factory fully assembled and adjusted
- Torsional vertical operating pipe connects to a 90-degree gearbox to transition
from torsional to push-pull operation to eliminate pipe windup issues - Drive linkage is set in toggle in the “closed” and “open” position
- “Push-Pull” interphase linkage utilized so all three pole units operate in unison
- Tubular unitized spine has accessible mounting locations and adds rigidity
to the pole - Quick Install switches can be supplied with arc horns, Cleaveland/Price
Superwhip®, or the Cleaveland/Price ReliaVac® Interrupter.
Unitized Aluminum Vertical Break
Same reliable V2-CAV and V2-CAVU switch designs applied in a phase-over-phase configuration using a push-pull linkage to maintain simultaneous opening and closing motion.
Type | V2-CAV, V2-CAVU
Live Parts Material | Aluminum
Contact Material | Silver-to-Silver
Available Voltages | 69-230kV
Available Amperages | 1200-3000A
Available Mounting | Phase-Over-Phase
Available Base Styles | Double Channel, Tubular
Jaw Insulator Orientation | Inclined
Terminal Pad Style | Flat – Vertical or Three Sided “U”
Unitized Aluminum Center Break
Same reliable CB-AV switch design applied in a compact phase-over-phase configuration – a perfect application for the reduced base width style.
Type | CB-AV
Live Parts Material | Aluminum
Contact Material | Silver-to-Silver
Available Voltages | 69-138kV
Available Amperages | 1200-3000A
Available Mounting | Phase-Over-Phase
Available Base Styles | Formed
Jaw Insulator Orientation | Inclined
Terminal Pad Style | Three Sided “U”
Unitized Copper Side Break
Same reliable all-copper RL-C switch design applied in a unitized phase-over-phase configuration for applications requiring a side break style blade motion.
Type | RL-C
Live Parts Material | Copper
Contact Material | Silver-to-Silver
Available Voltages | 69kV
Available Amperages | 1200-2000A
Available Mounting | Phase-Over-Phase
Available Base Styles | Single Channel, Double Channel, Tubular
Jaw Insulator Orientation | Parallel
Terminal Pad Style | Flat – Vertical
Multi-Way Copper Side Break
Available in unitized two and three way configurations that minimize installation time and provide a wide range of conductor takeoff angles for challenging transmission applications.
Type | RL-C2W, RL-C3W
Live Parts Material | Copper
Contact Material | Silver-to-Silver
Available Voltages | 69-138kV
Available Amperages | 1200-2000A
Available Mounting | Phase-Over-Phase
Available Base Styles | Tubular
Jaw Insulator Orientation | Parallel
Terminal Pad Style | Flat – Vertical
“Quick Install” Benefits
Easy to install | Low force operation | Consistent full contact engagement on all three phases regardless of pole height and operating speed | Cost effective
The unitized switches ship from the Cleaveland/Price factory fully assembled and adjusted on their individual mounting frames. Several switches can ship on a flatbed.
The assembled switch is delivered to site on a utility trailer. First step in installation is raising the assembly off of the trailer using a crane.
The assembly is guided to the transmission pole.
The switch assembly is secured to the pole.
The assembly is guided to the transmission pole.
The vertical operating pipe is bolted to the switch operator and the pre-installed gear box. The switch ships from the factory fully adjusted with the linkage set in toggle in the closed and open positions.
The interrupters (whips or full-load interrupters) are installed and jumper cables to the switch terminal pads are attached. No switch adjusting is required.
SCADA-ready Installations
A “Quick Install” switch can be operated manually with a swing handle or a wormgear-type operator, depending upon the type of interrupter supplied on the switch. The switch also may be operated with a transmission class motor operator for remotely operating the switch through a customer’s SCADA system.
A SCADA-ready installation would consist of a “Quick Install” switch, Cleaveland/Price motor operator, customer’s choice of RTU, provision for customer’s choice of communication means, and any other specified equipment such as sensors or fault indicators.
The BT-T operator is a 17,000 in-lb. torque operator that will open or close a switch in 3.4 seconds with 180° rotation of the vertical operating pipe. It comes with a padlockable safety cover that protects operating personnel from rotating parts and also prevents tampering with the mechanism. A padlockable torque– relief decoupler is also provided. The motor operator is supplied with contacts that will indicate the true switch position whether the vertical pipe is coupled or decoupled. For manual operation, a telescoping swing handle and handcrank are supplied.
At locations where low voltage AC is not available for charging the BT-T’s battery, a complete solar charging package can be offered. Consult the factory for more information, custom design requests, and other configurations.
Motor operator
SCADA installation with BT-T motor operator and communication by radio.
SCADA installation with BT-T motor operator and communication by satellite.
Switch, Voltage, and Accessories Available



