Unitized Aluminum Vertical Break

Reliable, low profile design. Utilizes the same live parts as our V2-CA/V2-CAU product line.

Decoration

Ideal for transmission applications where conductor spacing is close and full load interrupting devices are required.

Unitized V2-CA Card

UNITIZED Switch

V2-CAV

Decoration

The Cleaveland/Price V2-CAV and V2-CAVU switch design features an inclined jaw end insulator.

Unitized V2-CAVU Card

UNITIZED Switch

V2-CAVU

Decoration

The Cleaveland/Price V2-CAV and V2-CAVU switch design features an inclined jaw end insulator.

Unitized Aluminum Vertical Break Features

Decoration
  1. Hot-dip galvanized tubular mounting spine
  2. Hot-dip galvanized steel base with tubular reinforcement
  3. “Push-Pull” interphase linkage
  4. 90-degree miter box and drive linkage, set to toggle in the “closed” and “open” position
  5. Reduced base length for more compact mounting
  6. Insulator jacking/leveling bolts
  7. Sealed, hydrophobically vented maintenance-free bearing assembly
  8. Non-cast, extruded aluminum terminal pads. Available with NEMA standard hole pattern on one flat face, or three NEMA standard hole patterns on a u-shaped profile.
  9. Braidless, high pressure rolling line contacts at the hinge and jaw
  10. High strength extruded aluminum blade
  11. Replaceable, high conductivity silver-to-silver contacts between the blade and jaw.
  12. Cleaveland/Price ReliaVac® Interrupter shown. Consult the factory for other interrupting needs.

Engineered for Performance

Decoration

Cleaveland/Price incorporates simple, quality features into every aspect of switch design. The non-cast construction results in superior dependability. The current carrying parts are fabricated from extruded aluminum and hard-drawn copper, producing strong and highly conductive live components. Contacts are designed to take advantage of electromagnetic forces by using a reverse loop configuration at both the hinge and jaw or the switch. Current transfer points are kept to a minimum. Operating mechanism parts are fabricated from cold-rolled and hot-rolled steel. All parts are fabricated using CNC punching, cutting, machining, and bending methods. We apply our design and manufacturing philosophy across the entire product line from the smallest hook stick operated switch to the largest group operated switch.

Unitized “Quick Install” Switches

For 69kV-230kV Transmission Applications

Decoration

Our quick install transmission switches utilize the same proven design features as on our substation class disconnect switches. The switch ships from the factory fully adjusted and ready to be installed.

Single Way Aluminum Vertical Break

Single Way Aluminum Center Break

Single Way Copper Side Break

Multiway Copper