LineScope® Medium and High Voltage Power Sensor

Voltage and Current Sensor with Fault Indication

Decoration

LineScope® is a high accuracy, voltage-powered monitoring system for 4kV through 138kV circuits that delivers voltage, current, and fault data. Its conductor-mounted sensors and compact RTU enable real-time diagnostics, waveform capture, and flexible deployment across grounded or ungrounded systems without the limitations of current-powered devices.

Built for Practical Deployment”

Decoration
LineScope® is a voltage powered, three-phase monitoring system designed for circuits ranging from 4kV to 138kV. Unlike inductively or battery powered alternatives LineScope® harvests energy directly from line voltage, enabling installation on lightly loaded or end-of-line applications. It operates without an internal battery; instead, it utilizes a supercapacitor for last-gasp functionality which eliminates battery maintenance and improving long-term reliability. Its conductor-mounted LineProbe sensors stream synchronized voltage and current data to the RTU3212, enabling precise fault detection, waveform capture, and neutral current calculation. The system’s patented synchronization scheme ensures high-resolution data integrity with 32 samples per cycle transmitted via a 915MHz spread spectrum radio. Engineers can access RMS voltages, load and fault currents (up to 32kA peak), harmonic distortion, power factor, and fault direction without server-side software. LineScope® integrates seamlessly into DNP 3.0 SCADA and smart grid environments, supporting real-time diagnostics and automated event reporting through COMTRADE files. Installation is streamlined with hotstick compatible LineProbes that accommodate a wide range of conductor diameters and circuit configurations, including delta and wye systems. The RTU3212 offers flexible communication options (RS232, RS485, Ethernet) and a compact footprint for retrofit applications. With a design life exceeding 20 years and ingress protection rated to IP68, LineScope® delivers robust, long-term performance for utility engineers seeking reliable, high-fidelity grid monitoring.
LineScope Probe
LinScope Numbered

LineScope® Features

Decoration
  1. Head with sensors, radio, and super capacitor
  2. Hot sticking ring
  3. High accuracy resistor with silicone overfold
  4. Conductor saddle
  5. Voltage reference cable

Overview with Wireless Connection and SCADA Integration

Decoration

The LineScope® wireless radio infrastructure enables communication between the LineScope® and the RTU3212. The LineScope® transmits voltage and current data to the RTU, which processes this information to generate power quality metrics. After processing, the RTU3212 provides the data via a DNP3 interface, facilitating integration with a SCADA network. Additionally, the RTU3212 may be polled by intermediary devices, such as an SEL relay, for seamless incorporation into preexisting SCADA installations. The RTU3212 is designed for compatibility with installations in Cleaveland/Price motor operators, Cleaveland/Price CommBridge units, or other suitable enclosures.

RTU3212

Decoration

The RTU3212 is a full-featured RTU capable of replacing or supplementing an existing RTU. The device features fifteen digital inputs, four digital outputs, two RS232 ports, an RS485 port, and an Ethernet port. This RTU has a small footprint (4.18” x 6”) and minimal power requirements (<1W at 9-30VDC). The RTU3212 can be installed in any enclosure, and retrofit applications are provided with an antenna kit.

CommBridge

Decoration
The CommBridge contains all of the components necessary to receive LineScope® data and report it to the SCADA system. The CommBridge-B is the standard model with an integrated battery, and the CommBridge-S has a smaller form with no integrated battery and reduced backup functionality.