SOLUTIONS
Urban Underground Distribution
A large urban utility in the northeast
One of the largest investor-owned companies in the United States, operating out of New York State serving more than 10 million people, employes over 14,000 individuals, and is responsible for 93,000 miles of underground distribution cable and 36,000 miles of overhead distribution cable. Cleaveland/Price developed three different submersible controllers for three types of switchgear to meet the customer’s needs.
The customer, with their large infrastructure of underground distribution lines and switches, needed a way to control the switches remotely with the additional caveat that the controller also be mounted in the underground vault with the switchgear. This meant that the controller and all mating connections to the switchgear needed to be submersible if the vault filled with water.
Cleaveland Price Inc. (C/P) developed three different submersible controllers for three types of switchgear to meet the customer’s needs:
- A gas insulated distribution switch (such as those produced by G&W Electric) using a submersible controller and a C/P manufactured motor.
- A submersible controller for trial use with a gas insulated switch manufactured by DEBA (a Belgian switchgear manufacturer) using a motor internal to the switch enclosure.
- A submersible controller for an Elastimold/ABB vacuum switch using a magnetic actuator.
While each of the switchgear types require different control electronics, all units were installed into submersible enclosures. These enclosures are pressure tested both at the C/P manufacturing facility to ensure there are no leaks as well as in the field after installation of the gasketed door. The controllers are equipped with a water detection circuit that provides a status remotely so, if a leak occurs, field crews can get to the unit quickly to prevent water damage. Unbolting and bolting the door is labor intensive and requires confirmation of a proper seal, so several waterproof features were added that enable basic features of the controller while not compromising the door seal. A tethered submersible control box to allow local operation of the switchgear, waterproof lights allow field personnel to assess basic controller status, and a sealed RJ45 port allows communication with internal devices.
The submergibility of the C/P enclosure was tested during Hurricane Sandy in 2012 as the northeast experienced extensive flooding. At the time of the storm, there were over 200 C/P enclosures installed without a single unit experiencing water ingress despite heavy flooding. The customer has installed over 450 devices since the beginning of the project in 2007 and continues to order control enclosures as new needs arise.
Elastimold/ABB controller showing several key components.
1 | Pressure Test Port
2 | Local Indication Lights
3 | Waterproof Switch and Handheld connections
4 | Water Detection Sensors
A typical underground vault containing a gas switch prior to the retrofit of the C/P controller.
The submergibility of the C/P enclosure was tested during Hurricane Sandy in 2012 as the northeast experienced extensive flooding. At the time of the storm, there were over 200 C/P enclosures installed without a single unit experiencing water ingress despite heavy flooding.





