Aluminum Vertical Break

The Original—Built on a Proven Legacy

Decoration

Efficient, simple designs that utilize industry proven principles and materials for superior performance and long-term reliability.

C106C054G001_RET

Aluminum Vertical Break Switch

V2-CA

Decoration

The Cleaveland/Price V2-CA is a three pole, group operated aluminum vertical break switch for installation in substation or transmission line locations

UTerminal

Aluminum Vertical Break Switch

V2-CAU

Decoration

Similar to the proven V2-CA design, the V2-CAU utilizes three-sided terminals to allow greater flexibility when making connections with multiple conductors

V2_CAU_RET

Aluminum Vertical Break Switch

V2-CAV

Decoration

Same as the proven V2-CA design, the V2-CAV offers an inclined insulator at the jaw end to reduce the base footprint for more compact base mounting requirements

Aluminum Vertical Break Features

Designed for Simplicity and Superior Reliability

Decoration
  1. Unbreakable, non-cast copper terminal pads with NEMA standard hole pattern
  2. Fully insulated journal bearing
  3. Unbreakable, non-cast operating crank
  4. Stainless steel counterbalance springs insulated from the current path
  5. Hard-drawn, high conductivity copper current-carrying parts
  6. Silver-to-silver contacts at hinge and jaw
  7. Stainless steel contact springs insulated from the current path
  8. Hard-drawn, high conductivity copper contact fingers at hinge and jaw
  9. Plain or tin-plated terminal pads
  10. Hot-dip galvanized steel base
  11. Double-sealed, maintenance-free bearing assembly

Engineered for Performance

Decoration

Cleaveland/Price has a very basic approach to design: keep it simple. It is an approach employed from material selection to mechanical design. The Cleaveland/Price V2-C disconnect switch current carrying parts are manufactured from high strength, high conductivity copper. All switches are of non-cast design for superior dependability of parts. Switch performance is not troubled by flaws that could occur in the casting process. Contacts are designed to take advantage of electromagnetic forces by using a reverse loop configuration at both the hinge and jaw of the switch. Current transfer points are kept to a minimum.

Blade Turnover

Innovation for Full Contact Pressure

Decoration

Traditional Problem

Decoration

When the blade on a conventional switch rotates to the final closed position in the break-jaw, it does not consistently stop at the point of optimum contact pressure.

Many switches use a stop on the rotating insulator to set the blade position in the break-jaw. Due to the cumulative play of the multiple linkage points, this type of stop is too distant from the blade to accurately control the blade motion, . Additionally, inconsistent operating speeds can negatively affect proper blade turnover and position in the break-jaw. These fundamental design weaknesses lead to inadequate contact pressure that eventually causes contact pitting, burning, and failure.

Innovative Solution

Decoration

Instead of locating the blade stop on the rotating insulator, the Cleaveland/Price 500 kV V2-CA blade stop is factory-machined directly into the blade at the hinge. This superior location of the blade stop removes all cumulative linkage play and ensures accurate blade rotation in the break-jaw, consistently completing the closed operation at the precise point of achieving maximum contact pressure—no matter how slow or fast the switch is operated.
The cutaway view shows how the unique Cleaveland/Price turnover stop allows the blade to rotate until the factory-machined slot in the blade engages with the hinge pin. This results in a consistent and highly accurate blade turnover angle with full contact pressure for every operation.

Patented Break-Jaw Design

Decoration

The Conventional Break-Jaw Problem

Decoration

Conventional break-jaw designs lose contact pressure during short circuits due to inferior placement of the contact springs.

The forces generated under short circuits create a side-to-side movement of the blade within the break-jaw. Causing a make-and-break action between the blade and jaw contacts. Resulting in arcing, pitting, and burning of the switch contacts.

The Innovative Solution by Cleaveland/Price

Decoration

The superior Cleaveland/Price 500 kV V2-CA break-jaw design maintains a constant high-contact pressure as the blade moves side-to-side and increases during short circuits by working in unison with the electromagnetic forces generated by the current path.

The ideal location and design of the contact springs join the contact fingers together, allowing the switch contacts to move side-to-side with the blade during short circuits. This floating contact spring system maintains contact spring pressure during side-to-side movement while maintaining a constant electrical connection to ensure no arcing of contacts.

StayDry® Bearing

Decoration

The StayDry® bearing provides the ultimate in reliability as a patented, watertight ball bearing assembly for rotating insulators on disconnect switches.

The application of hydrophobic membrane technology eliminates seal stress and maintains an environment free of both water and condensing moisture, thereby preventing any corrosion. This proven technology has been used across a wide array of industries for decades to protect enclosed volumes from the effects of temperature and pressure fluctuations, moisture, and contaminants.

Vertical Break

Superior Reliability and Dependability.

Decoration

Quality materials are the foundation of any reliable disconnect switch. Made from high-quality materials, Cleaveland/Price vertical switches feature an all non-cast design, reducing potential casting defects and enhancing long-term dependability.

Aluminum

Copper

High Current

U Terminal

Extra High Voltage