SOLUTIONS
4 Way Switch Controller
Anaheim Public Utilities
Anaheim Public Utilities (APU, https://www.anaheim.net/470/Electric-Services) is a mid-size municipal electric utility with over 1000 miles of distribution lines located in and primarily serving Anaheim, California. Since 1990, APU has installed over 750 miles of underground distribution lines.
Because of the large usage of underground distribution lines and the urban environment, switching equipment and sensing devices are also needed underground to avoid above ground switching stations. Many of the underground vaults house multi-pole switches for increased switching density, so APU has elected to install controllers aboveground for ease of access.
Cleaveland Price, Inc. (C/P) has been manufacturing single-way aboveground controllers for underground or vault-mounted switchgear since the early 2000s. APU, a C/P customer since the late 1990s, with their unique circumstances, desired a solution that would enable a single controller to operate up to four separate motors installed on underground disconnect switches. Additionally, APU wanted a single controller that was field upgradeable to add additional motors as new remotely operable switching equipment is needed.
C/P Engineering, in tandem with APU, designed a large custom enclosure containing a single motor control, the corresponding electronics, and all wiring for these controllers to be upgraded with a “module panel.” This module panel contains all equipment needed to power and provide status for a single motor and can be installed in the field. This module panel approach allows APU to save costs on installations that require only two or three motors by not needing to purchase a controller prepopulated for four motors.
The bottom half of the large enclosure with all equipment needed to operate four motors.
1 | Motor Control for Unit 1
2 | RTU
3 | Voltage and Current Analog Wiring
4 | Connections for Four Motors
Field installation of a multi-way controller with two module panels installed.
1 | Analog Test Switches
2 | Module Panel 1 for Motor 2
3 | Module Panel 2 for Motor 3
4 | Location for Module Panel 3
What is shown is the existing version of the multi-way controller. C/P and APU have been iterating on the design since 2007, adding new features as they are identified. APU has placed orders for over 650 controllers and nearly 1200 module panels since starting the project.
This module panel approach allows APU to save costs on installations that require only two or three motors by not needing to purchase a controller prepopulated for four motors.





