Copper “V” Center Break
Same benefits as the parallel insulator copper design only in a “V” configuration.
Inclined insulator design with truss style copper blades for applications requiring compact base mounting.
Copper V CENTER Break Switch
CB-CV
The Cleaveland/Price CB-CV switch is a three pole, group operated, copper center break switch for substation installations.
Copper V Center Break Anatomy
- Unbreakable, non-cast copper terminal pads with NEMA standard hole patterns
- Braidless, high pressure line contacts at the hinge
- Blade levelling adjustment studs
- High conductivity copper truss blade
- Replaceable, high conductivity silver-to-silver contacts at the hinge and jaw
- Stainless steel contact springs
- Plain or tin plated terminal pads
- Maintenance-free bearing assembly
- Hot dip galvanized steel base
- Rotating insulator stop
- Simple yet rugged tie-rod assembly with stainless steel hardware
Engineered for Performance
We apply this approach from material selection to mechanical design. All Cleaveland/Price CB-A and CB-AV switch current-carrying parts are fabricated from high-strength, high-conductivity aluminum or copper. Switch performance is not compromised by flaws that could occur in the casting process. To assure product quality, all incoming material is tested for conductivity and composition verification. Every current carrying part is made in the United States at the Cleaveland/Price manufacturing facility for maximum quality control.
Adjustment Features
Operating Pipe Adjustment
Threaded adjustments allow for quick and precise switch setup. Not only are the interphase and drive pipes of the operating mechanism supplied with adjustable threaded rod ends, the drive lever has a threaded adjustable radius
as well. No special tools are required.
Live Part Adjustment
CB-AV pole units are shipped from the factory pole unit assembled with insulators and are completely adjusted. Should conductor tension move the switch contacts out of alignment, live part adjustments can be made by using the jacking bolts provided at the base of the switch. By using the additional jacking bolts at the blade hinge, the blade tip contacts can be lowered or raised until the contacts
are perfectly aligned.



