Unitized “Quick Install” Switches

RL-C2W | RL-C3W

Decoration

Cleaveland/Price “Quick Install” switches are unitized transmission switches that ship from the factory fully assembled and adjusted.

These unitized switches are available in vertical break and center break designs and can be used in sectionalizing, tap, and multi-way transfer applications. Vertical break switches are provided with an inclined jaw end insulator to shorten the base and reduce weight. Center break switches are “V” type for the smallest base and to minimize steel weight. “Quick Install” switches are designed to address issues that customers have with other transmission switch designs.

Some customers have difficulty getting switches adjusted properly, particularly when mounted on tall transmission poles. This is the result of the torsional “windup” of the vertical operating pipe between phases, which causes the three pole units to operate out of sync. Cleaveland/Price has designed the “Quick Install” switches with “push-pull” interphase linkage so that the three pole units always move in unison, regardless of the length of the vertical operating pipe.The switch stays in adjustment after installation, just as it was tested and operated at the factory.

“Quick Install” switches are supplied to meet customers’ site requirements. The base is designed to match mounting hole locations on new or existing steel or concrete poles, as requested.

Switch phase spacing is set to match the transmission line conductor spacing as a standard. With this standardization, it is not necessary to change spacing of conductors and money is saved on pole costs by not having to install extra high poles needed by knee brace switch mounting.

The switches typically are supplied with standard strength porcelain insulators. At voltages up to 115 kV, vertical break switches can be supplied with polymer insulators. On center break switches, polymer insulators are available on 69 kV and 115 kV switches with a maximum short time peak rating of 99 kA.

Consult the factory for higher short circuit ratings. Vertical break “Quick Install” switches can be supplied with arc horns, Cleaveland/Price Superwhip® or ReliaVac® vacuum interrupter, depending on current interrupting requirements.

RL-C2W
RL-C3W

Quality Construction

Decoration

Total non-cast construction results in superior dependability of parts

  • Hard-drawn, high conductivity copper produces stronger, more conductive live components than parts made of cast materials.
  • Wiping action on the break-jaw keeps contacts clean for years of reliable service.
  • Parallel blade construction allows free flow of air over the blade surfaces for efficient cooling.
  • Built-in closed position blade stop on the live parts prevents over-travel on the blade.

RL-C2W By the Numbers (Ratings)

Decoration
RL-C2WVoltage RatingsAmperage Ratings
Catalog
Number
Nominal
Voltage (kV)
Maximum
Voltage (kV)
BIL (kV)Insulator
TR No.
Continuous
Current (A)
Peak Withstand
Current (kA)
Short-Time Withstand
Current (kA @ 3 sec.)
E2FB6972.535021612009961
E2FD6972.5350216200011470
E2GB11512355028612009961
E2GD115123550286200011470
E2HB13814565028812009961
E2HD138145650288200011470

RL-C3W By the Numbers (Ratings)

Decoration
RL-C3WVoltage RatingsAmperage Ratings
Catalog
Number
Nominal
Voltage (kV)
Maximum
Voltage (kV)
BIL (kV)Insulator
TR No.
Continuous
Current (A)
Peak Withstand
Current (kA)
Short-Time Withstand
Current (kA @ 3 sec.)
E3FB6972.535021612009961
E3FD6972.5350216200011470
E3GB11512355028612009961
E3GD115123550286200011470
E3HB13814565028812009961
E3HD138145650288200011470

Unitized “Quick Install” Switches

For 69kV-230kV Transmission Applications

Decoration

Our quick install transmission switches utilize the same proven design features as on our substation class disconnect switches. The switch ships from the factory fully adjusted and ready to be installed.

Single Way Aluminum Vertical Break

Single Way Aluminum Center Break

Single Way Copper Side Break

Multiway Copper