Vertical Break Switch

V2-HC

Decoration

The Cleaveland/Price V2-HC is a three pole, group operated, copper vertical break switch for high-current applications such as generator disconnecting. Accessories and options needed to adapt the switch to a customer’s particular requirements are available. The V2-HC may be manually operated by use of a 40:1 wormgear mechanism or electrically operated by use of the Cleaveland/Price TP-C2 motor operator. The V2-HC meets ANSI C37, NEMA, and IEEE Standards and the rating requirements of IEC Standards.

Quality Construction

Decoration
  • Unbreakable, non-cast copper terminal pads with NEMA standard 4-hole pattern
  • Fully insulated journal bearing that prevents current fl ow through the live operating linkage
  • Unbreakable, non-cast operating crank
  • High conductivity copper current carrying parts
  • Silver-to-silver contacts at hinge and jaw
  • Stainless steel contact springs insulated from the current path
  • Double sealed ball bearing rotating insulator bearing assembly
  • Hot-dip galvanized double channel base

Engineered for Performance

Decoration

Cleaveland/Price has a very basic approach to design . . . keep it simple. It is an approach that is employed from material selection to mechanical design. The Cleaveland/Price V2-C disconnect switch current carrying parts are manufactured from high strength, high conductivity copper. All switches are of non-cast design for superior dependability of parts. Switch performance is not troubled by flaws that could occur in the casting process.Contacts are designed to take advantage of electromagnetic forces by using a reverse loop configuration at both the hinge and jaw of the switch. Current transfer points are kept to a minimum.

Blade Turnover

Innovation for Full Contact Pressure

Decoration

Traditional Problem

Decoration

When the blade on a conventional switch rotates to the final closed position in the break-jaw, it does not consistently stop at the point of optimum contact pressure.

 

Many switches use a stop on the rotating insulator to set the blade position in the break-jaw. This type of stop is too distant from the blade to accurately control the blade motion, due to the cumulative play of the multiple linkage points. Additionally, inconsistent operating speeds can negatively affect proper blade turnover and position in the break-jaw. These fundamental design weaknesses lead to inadequate contact pressure that eventually causes contact pitting, burning, and failure.

Innovative Solution

Decoration

Instead of locating the blade stop on the rotating insulator, the Cleaveland/Price 500 kV V2-CA blade stop is factory-machined directly into the blade at the hinge. This superior location of the blade stop removes all cumulative linkage play and ensures accurate blade rotation in the break-jaw; therefore, consistently completing the closed operation at the precise point of achieving maximum contact pressure, no matter how slow or fast the switch is operated.
The cutaway view shows how the unique Cleaveland/Price turnover stop allows the blade to rotate until the factory-machined slot in the blade engages with the hinge pin. This results in a consistent and highly accurate blade turnover angle with full contact pressure for every operation.

Patented Break-Jaw Design

Decoration

The Conventional Break-Jaw Problem

Decoration

Conventional break-jaw designs lose contact pressure during short circuits due to inferior placement of the contact springs.


The forces generated under short circuits create a side-to-side movement of the blade within the break-jaw, causing a make-and-break action between the blade and jaw contacts, resulting in arcing, pitting, and burning of the switch contacts.

The Innovative Solution by Cleaveland/Price

Decoration

The superior Cleaveland/Price 500 kV V2-CA break-jaw design maintains a constant high-contact pressure as the blade moves side-to-side and increases during short circuits by working in unison with the electromagnetic forces generated by the current path.


The ideal location and design of the contact springs join the contact fingers together, allowing the switch contacts to move side-to-side with the blade during short circuits. This floating contact spring system maintains contact spring pressure during side-to-side movement, while maintaining a constant electrical connection to ensure no arcing of contacts.

StayDry® Bearing

Decoration
The StayDry® bearing is a patented, watertight ball bearing assembly for rotating insulators on disconnect switches which provides the ultimate in reliability. The application of hydrophobic membrane technology eliminates seal stress and keeps the bearing free of water and any condensing moisture thereby preventing any corrosion. This proven technology has been used across a wide array of industries for decades to protect enclosed volumes from the effects of temperature and pressure fluctuations, moisture, and contaminants.

By the Numbers (Ratings)

Decoration
V2-HCVoltage RatingsAmperage Ratings
Catalog
Number
Nominal
Voltage (kV)
Maximum
Voltage (kV)
BIL (kV)Insulator
TR No.
Continuous
Current (A)
Peak Withstand
Current (kA)
Short-Time Withstand
Current (kA @ 3 sec.)
BCAH7.28.395222400019575
BACK7.28.395222600019575
BCBH14.415.5110225400019575
BCBK14.415.5110225600019575
BCCH2327150227400019575
BCCK2327150227600019575
BCDH34.538200231400019575
BCDK34.538200231600019575
BCEH4648.3250267400019575
BCEK4648.3250267600019575

Vertical Break

Superior Reliability and Dependability.

Decoration

Made from the finest materials, all of Cleaveland/Price’s vertical switches are of non-cast design for superior dependability of parts—the total non-cast design eliminates flaws that can occur in the casting process–and enhanced reliability through the design.

Aluminum

Copper

High Current

U Terminal

Extra High Voltage