Unitized “Quick Install” Switches
CB-AV
Cleaveland/Price “Quick Install” switches are unitized transmission switches that ship from the factory fully assembled and adjusted.
These unitized switches are available in vertical break and center break designs and can be used in sectionalizing, tap, and multi-way transfer applications. Vertical break switches are provided with an inclined jaw end insulator to shorten the base and reduce weight. Center break switches are “V” type for the smallest base and to minimize steel weight. “Quick Install” switches are designed to address issues that customers have with other transmission switch designs.
Some customers have difficulty getting switches adjusted properly, particularly when mounted on tall transmission poles. This is the result of the torsional “windup” of the vertical operating pipe between phases, which causes the three pole units to operate out of sync. Cleaveland/Price has designed the “Quick Install” switches with “push-pull” interphase linkage so that the three pole units always move in unison, regardless of the length of the vertical operating pipe. The switch stays in adjustment after installation, just as it was tested and operated at the factory.
“Quick Install” switches are supplied to meet customers’ site requirements. The base is designed to match mounting hole locations on new or existing steel or concrete poles, as requested.
Switch phase spacing is set to match the transmission line conductor spacing as a standard. With this standardization, it is not necessary to change spacing of conductors and money is saved on pole costs by not having to install extra high poles needed by knee brace switch mounting.
The switches typically are supplied with standard strength porcelain insulators. At voltages up to 115 kV, vertical break switches can be supplied with polymer insulators. On center break switches, polymer insulators are available on 69 kV and 115 kV switches with a maximum short time peak rating of 99 kA.
Consult the factory for higher short circuit ratings. Vertical break “Quick Install” switches can be supplied with arc horns, Cleaveland/Price Superwhip® or ReliaVac® vacuum interrupter, depending on current interrupting requirements.
Center break switches can be supplied with arc horns, quick break whips, or single-bottle vacuum interrupters for loop splitting application.
Quality Construction
Total non-cast construction results in superior dependability of parts
- Extruded aluminum and hard drawn copper produces stronger, highly conductive – live components
- Wiping action on all moving contacts keeps these surfaces clean for years of reliable service
- If conductor tension moves the switch contacts out of alignment, live part adjustments can easily be made by using the jacking bolts provided at the base of the switch. By using the
additional jacking bolts at each blade hinge, the blade tip contacts can be lowered or raised until the contacts are perfectly aligned.
By the Numbers (Ratings)
| CB-AV | Voltage Ratings | Amperage Ratings | |||||
|---|---|---|---|---|---|---|---|
| Catalog Number | Nominal Voltage (kV) | Maximum Voltage (kV) | BIL (kV) | Insulator TR No. | Continuous Current (A) | Peak Withstand Current (kA) | Short-Time Withstand Current (kA @ 3 sec.) |
| CVFB | 69 | 72.5 | 350 | 216 | 1200 | 99 | 38 |
| CVFC | 69 | 72.5 | 350 | 216 | 1600 | 114 | 44 |
| CVFD | 69 | 72.5 | 350 | 216 | 2000 | 164 | 63 |
| CVFF | 69 | 72.5 | 350 | 216 | 3000 | 195 | 75 |
| CVGB | 115 | 123 | 550 | 286 | 1200 | 99 | 38 |
| CVGC | 115 | 123 | 550 | 286 | 1600 | 114 | 44 |
| CVGD | 115 | 123 | 550 | 286 | 2000 | 164 | 63 |
| CVGF | 115 | 123 | 550 | 286 | 3000 | 195 | 75 |
| CVHB | 138 | 145 | 650 | 288 | 1200 | 99 | 38 |
| CVHC | 138 | 145 | 650 | 288 | 1600 | 114 | 44 |
| CVHD | 138 | 145 | 650 | 288 | 2000 | 164 | 63 |
| CVHF | 138 | 145 | 650 | 288 | 3000 | 195 | 75 |
| CVJB | 161 | 170 | 750 | 291 | 1200 | 99 | 38 |
| CVJC | 161 | 170 | 750 | 291 | 1600 | 114 | 44 |
| CVJD | 161 | 170 | 750 | 291 | 2000 | 164 | 63 |
| CVJF | 161 | 170 | 750 | 291 | 3000 | 195 | 75 |
Unitized “Quick Install” Switches
For 69kV-230kV Transmission Applications
Our quick install transmission switches utilize the same proven design features as on our substation class disconnect switches. The switch ships from the factory fully adjusted and ready to be installed.



