Vertical Break Switch
V2-C
The Cleaveland/Price 4000A V2-C is a three-pole, group-operated, copper vertical break switch for high-current applications.
Accessories and options needed to adapt the switch to a customer’s particular requirements are available. The V2-C may be manually operated by use of a 40:1 wormgear mechanism or electrically operated by use of a Cleaveland/Price TP-C2 or TP-C3 motor operator.
The V2-C meets ANSI C37.30.1, NEMA, and IEEE Standards and the rating requirements of IEC Standards.
Quality Construction
- Unbreakable, non-cast copper terminal pads with three NEMA standard 4-hole patterns on each terminal end
- Fully insulated journal bearing that prevents current flow through the live operating linkage
- Unbreakable, non-cast operating crank
- High-conductivity copper current-carrying parts
- Reverse-loop contacts at the hinge and jaw with silver-to-silver contact surfaces
- Stainless steel contact springs insulated from the current path
- Double-sealed ball bearing rotating insulator bearing assembly
- Hot-dip galvanized double-channel base
- Superbly counterbalanced blades with stainless steel counterbalanced springs
Engineered for Performance
Cleaveland/Price has a very basic approach to design . . . keep it simple. It is an approach that is employed from material selection to mechanical design. The Cleaveland/Price V2-C disconnect switch current carrying parts are manufactured from high strength, high conductivity copper. All switches are of non-cast design for superior dependability of parts. Switch performance is not troubled by flaws that could occur in the casting process.Contacts are designed to take advantage of electromagnetic forces by using a reverse loop configuration at both the hinge and jaw of the switch. Current transfer points are kept to a minimum.
Blade Turnover
Innovation for Full Contact Pressure
Traditional Problem
When the blade on a conventional switch rotates to the final closed position in the break-jaw, it does not consistently stop at the point of optimum contact pressure.
Many switches use a stop on the rotating insulator to set the blade position in the break-jaw. This type of stop is too distant from the blade to accurately control the blade motion, due to the cumulative play of the multiple linkage points. Additionally, inconsistent operating speeds can negatively affect proper blade turnover and position in the break-jaw. These fundamental design weaknesses lead to inadequate contact pressure that eventually causes contact pitting, burning, and failure.
Innovative Solution
Instead of locating the blade stop on the rotating insulator, the Cleaveland/Price 500 kV V2-CA blade stop is factory-machined directly into the blade at the hinge. This superior location of the blade stop removes all cumulative linkage play and ensures accurate blade rotation in the break-jaw; therefore, consistently completing the closed operation at the precise point of achieving maximum contact pressure, no matter how slow or fast the switch is operated.
The cutaway view shows how the unique Cleaveland/Price turnover stop allows the blade to rotate until the factory-machined slot in the blade engages with the hinge pin. This results in a consistent and highly accurate blade turnover angle with full contact pressure for every operation.
Patented Break-Jaw Design
The Conventional Break-Jaw Problem
Conventional break-jaw designs lose contact pressure during short circuits due to inferior placement of the contact springs.
The forces generated under short circuits create a side-to-side movement of the blade within the break-jaw, causing a make-and-break action between the blade and jaw contacts, resulting in arcing, pitting, and burning of the switch contacts.
The Innovative Solution by Cleaveland/Price
The superior Cleaveland/Price 500 kV V2-CA break-jaw design maintains a constant high-contact pressure as the blade moves side-to-side and increases during short circuits by working in unison with the electromagnetic forces generated by the current path.
The ideal location and design of the contact springs join the contact fingers together, allowing the switch contacts to move side-to-side with the blade during short circuits. This floating contact spring system maintains contact spring pressure during side-to-side movement, while maintaining a constant electrical connection to ensure no arcing of contacts.
StayDry® Bearing
By the Numbers (Ratings)
| V2-C | Voltage Ratings | Amperage Ratings | |||||
|---|---|---|---|---|---|---|---|
| Catalog Number | Nominal Voltage (kV) | Maximum Voltage (kV) | BIL (kV) | Insulator TR No. | Continuous Current (A) | Peak Withstand Current (kA) | Short-Time Withstand Current (kA @ 3 sec.) |
| B0AA | 7.2 | 8.3 | 95 | 202 | 600 | 65 | 25 |
| B0AB | 7.2 | 8.3 | 95 | 202 | 1200 | 99 | 38 |
| B0AC | 7.2 | 8.3 | 95 | 202 | 1600 | 114 | 44 |
| B0AD | 7.2 | 8.3 | 95 | 202 | 2000 | 164 | 63 |
| B0AE | 7.2 | 8.3 | 95 | 202 | 2500 | 164 | 63 |
| B0AF | 7.2 | 8.3 | 95 | 202 | 3000 | 195 | 75 |
| B0BA | 14.4 | 15.5 | 110 | 205 | 600 | 65 | 25 |
| B0BB | 14.4 | 15.5 | 110 | 205 | 1200 | 99 | 38 |
| B0BC | 14.4 | 15.5 | 110 | 205 | 1600 | 114 | 44 |
| B0BD | 14.4 | 15.5 | 110 | 205 | 2000 | 164 | 63 |
| B0BE | 14.4 | 15.5 | 110 | 205 | 2500 | 164 | 63 |
| B0BF | 14.4 | 15.5 | 110 | 205 | 3000 | 195 | 75 |
| B0CA | 23 | 27 | 150 | 208 | 600 | 65 | 25 |
| B0CB | 23 | 27 | 150 | 208 | 1200 | 99 | 38 |
| B0CC | 23 | 27 | 150 | 208 | 1600 | 114 | 44 |
| B0CD | 23 | 27 | 150 | 208 | 2000 | 164 | 63 |
| B0CE | 23 | 27 | 150 | 208 | 2500 | 164 | 63 |
| B0CF | 23 | 27 | 150 | 208 | 3000 | 195 | 75 |
| B0DA | 34.5 | 38 | 200 | 210 | 600 | 65 | 25 |
| B0DB | 34.5 | 38 | 200 | 210 | 1200 | 99 | 38 |
| B0DC | 34.5 | 38 | 200 | 210 | 1600 | 114 | 44 |
| B0DD | 34.5 | 38 | 200 | 210 | 2000 | 164 | 63 |
| B0DE | 34.5 | 38 | 200 | 210 | 2500 | 164 | 63 |
| B0DF | 34.5 | 38 | 200 | 210 | 3000 | 195 | 75 |
| B0EA | 46 | 48.3 | 250 | 214 | 600 | 65 | 25 |
| B0EB | 46 | 48.3 | 250 | 214 | 1200 | 99 | 38 |
| B0EC | 46 | 48.3 | 250 | 214 | 1600 | 114 | 44 |
| B0ED | 46 | 48.3 | 250 | 214 | 2000 | 164 | 63 |
| B0EE | 46 | 48.3 | 250 | 214 | 2500 | 164 | 63 |
| B0EF | 46 | 48.3 | 250 | 214 | 3000 | 195 | 75 |
| B0FA | 69 | 72.5 | 350 | 216 | 600 | 65 | 25 |
| B0FB | 69 | 72.5 | 350 | 216 | 1200 | 99 | 38 |
| B0FC | 69 | 72.5 | 350 | 216 | 1600 | 114 | 44 |
| B0FD | 69 | 72.5 | 350 | 216 | 2000 | 164 | 63 |
| B0FE | 69 | 72.5 | 350 | 216 | 2500 | 164 | 63 |
| B0FF | 69 | 72.5 | 350 | 216 | 3000 | 195 | 75 |
| B0GA | 115 | 123 | 550 | 286 | 600 | 65 | 25 |
| B0GB | 115 | 123 | 550 | 286 | 1200 | 99 | 38 |
| B0GC | 115 | 123 | 550 | 286 | 1600 | 114 | 44 |
| B0GD | 115 | 123 | 550 | 286 | 2000 | 164 | 63 |
| B0GE | 115 | 123 | 550 | 286 | 2500 | 164 | 63 |
| B0GF | 115 | 123 | 550 | 286 | 3000 | 195 | 75 |
| B0HA | 138 | 145 | 650 | 288 | 600 | 65 | 25 |
| B0HB | 138 | 145 | 650 | 288 | 1200 | 99 | 38 |
| B0HC | 138 | 145 | 650 | 288 | 1600 | 114 | 44 |
| B0HD | 138 | 145 | 650 | 288 | 2000 | 164 | 63 |
| B0HE | 138 | 145 | 650 | 288 | 2500 | 164 | 63 |
| B0HF | 138 | 145 | 650 | 288 | 3000 | 195 | 75 |
| B0JA | 161 | 170 | 750 | 291 | 600 | 65 | 25 |
| B0JB | 161 | 170 | 750 | 291 | 1200 | 99 | 38 |
| B0JC | 161 | 170 | 750 | 291 | 1600 | 114 | 44 |
| B0JD | 161 | 170 | 750 | 291 | 2000 | 164 | 63 |
| B0JE | 161 | 170 | 750 | 291 | 2500 | 164 | 63 |
| B0JF | 161 | 170 | 750 | 291 | 3000 | 195 | 75 |
| B0KA | 230 | 245 | 900 | 304 | 600 | 65 | 25 |
| B0KB | 230 | 245 | 900 | 304 | 1200 | 99 | 38 |
| B0KC | 230 | 245 | 900 | 304 | 1600 | 114 | 44 |
| B0KD | 230 | 245 | 900 | 304 | 2000 | 164 | 63 |
| B0KE | 230 | 245 | 900 | 304 | 2500 | 164 | 63 |
| B0KF | 230 | 245 | 900 | 304 | 3000 | 195 | 75 |
| B0KA | 230 | 245 | 1050 | 312 | 600 | 65 | 25 |
| B0KB | 230 | 245 | 1050 | 312 | 1200 | 99 | 38 |
| B0KC | 230 | 245 | 1050 | 312 | 1600 | 114 | 44 |
| B0KD | 230 | 245 | 1050 | 312 | 2000 | 164 | 63 |
| B0KE | 230 | 245 | 1050 | 312 | 2500 | 164 | 63 |
| B0KF | 230 | 245 | 1050 | 312 | 3000 | 195 | 75 |
Vertical Break
Superior Reliability and Dependability.
Made from the finest materials, all of Cleaveland/Price’s vertical switches are of non-cast design for superior dependability of parts—the total non-cast design eliminates flaws that can occur in the casting process–and enhanced reliability through the design.




