Center Break Switch

CB-A

Decoration

The Cleaveland/Price CB-A is a three-pole, group-operated, aluminum center break switch for installation in substation or transmission line locations. The switch can be mounted in the horizontal upright, vertical, or horizontal underhung positions. The CB-A is suitable for use in a variety of applications including line disconnecting and sectionalizing, circuit breaker bypass and isolation, and transformer isolation. Arc horns or quick break whips can be supplied when small amounts of transformer magnetizing currents or line charging currents must be interrupted.


Accessories and options needed to adapt the switch to a customer’s particular requirements are available. The CB-A may be operated manually by use of a swing handle or wormgear mechanism, or electrically operated by use of a type TP-C2 or BT-T motor operator.


The CB-A meets applicable NEMA and IEEE Standards and the rating requirements of applicable IEC Standards.

Quality Construction

Decoration

The CB-A continues the Cleaveland/Price tradition of designing simple, dependable switches without the use of castings. Knowledge gained from working with customers to identify and solve general switch problems has played a major part in refining the CB-A. Significant design features include:

  • Total non-cast aluminum, copper, and steel parts resulting in superior dependability
  • Live parts constructed from extruded aluminum and hard-drawn, high-conductivity copper, producing stronger, more conductive components than parts made of cast materials
  • Silver-to-silver, high-pressure line contacts for effective transfer current
  • Magnetically attracting parallel path hinge and jaw contacts for outstanding performance under short circuit
  • Wiping action at both the jaw contacts and hinge contacts that keep the contacts clean for years of reliable service. Jaw contacts have a long contact wipe surface to accommodate insulator movement.
  • Tin-plated copper terminal pads that can accept terminal connectors on three surfaces
  • Aluminum to tin-plated copper bolted connections. All bolted contact surfaces are prepared and treated with an oxide inhibitor. Moving contacts are silver-to-silver with a hard-drawn, high-conductivity copper base material.
  • Special hinge design supports high cantilever terminal loads while maintaining low pivot force

By the Numbers (Ratings)

Decoration
CB-AVoltage RatingsAmperage Ratings
Catalog
Number
Nominal
Voltage (kV)
Maximum
Voltage (kV)
BIL (kV)Insulator
TR No.
Continuous
Current (A)
Peak Withstand
Current (kA)
Short-Time Withstand
Current (kA @ 3 sec.)
C0FB6972.535021612009938
C0FC6972.5350216160011444
C0FD6972.5350216200016463
C0FF6972.5350216300019575
C0GB11512355028612009938
C0GC115123550286160011444
C0GD115123550286200016463
C0GF115123550286300019575
C0HB13814565028812009938
C0HC138145650288160011444
C0HD138145650288200016463
C0HF138145650288300019575
C0JB16117075029112009938
C0JC161170750291160011444
C0JD161170750291200016463
C0JF161170750291300019575
C0KB23024590030412009938
C0KC230245900304160011444
C0KD230245900304200016463
C0KF230245900304300019575
C0LB230245105031212009938
C0LC2302451050312160011444
C0LD2302451050312200016463
C0LF2302451050312300019575
C0ND3453621300324200016463
C0NF3453621300324300019575

Center Break

Superior Reliability through Design

Decoration

Our center break switch line is a non-cast, braidless design for superior reliability.

Aluminum

Copper

Aluminum V

Copper V